AGA Error Code E2
The electronic unit is too hot — what this fault code means on AGA induction hob / range error codes, and how we fix it.
- Fault code
- AGA induction hob / range error codes
- Thermal
Meaning
What code E2 means
The electronic unit is too hot
Coverage
Which models show it
- AEL361IN
- AEL481IN
- AMC36IN
- AMC48IN
- AMPRO36IN
- AEL36INRT
- AEL48INRT
- AMC36INRT
- AMC48INRT
- AGA ERA induction
Causes
Components that usually cause this code
We test each suspect part in the factory order before replacing anything.
The fix
How it is fixed
Check the installation of the range — confirm there is sufficient ventilation and that the cooling airflow is not obstructed. Can also be triggered in extreme cases by a cooking utensil being allowed to boil dry. On the AGA ERA, E2 is also associated with poor-quality or non-induction-suitable cookware; continued use may cause serious damage to the hob.
Safety & DIY disclaimer
Guides on this site are for information only. Appliance repair involves 240V electricity, gas connections, refrigerant and heavy cast-iron parts — anything you do yourself is at your own risk and can damage the appliance or cause injury. The safe option is to book a qualified technician.
Symptoms
Problems linked to this code
AGA induction hob / range error codes
More codes on this platform
Frequently asked questions
What does AGA error code E2 mean?
The electronic unit is too hot
Can I keep using my AGA with code E2?
A power cycle at the breaker (60 seconds) may clear a one-off code. If the code returns, stop using the affected zone or appliance and book service — continuing to run can turn a small fault into a board-level repair.
AGA showing code E2?
We read AGA fault logs with factory-level tools — no guesswork. Diagnostic fee applies toward your repair.
Mon–Sun 8:00AM–8:00PM
Independent service company — not affiliated with or authorized by AGA / AGA Rangemaster (Middleby). We repair out-of-warranty AGA appliances.