# AGA Error Code 130-136

> AGA error code 130-136 — Triac fault. Which models show it, what causes it and how it is fixed. Mon–Sun 8:00AM–8:00PM. Call or text 206-427-7323.

Triac fault — what this fault code means on AGA TEK / Tekelek PCB fault codes, and how we fix it.

**Fault code** · AGA TEK / Tekelek PCB fault codes · Power Switching

## What code 130-136 means

Triac fault

Reported per: Per element channel (7).

## Which models show it

- [AGA Classic eR7](https://aga.repair/aga-classic-er7-repair)
- [AGA Classic 39" Total Control](https://aga.repair/aga-classic-total-control-repair)
- [AGA ERA](https://aga.repair/aga-era-repair)

Models: eR7 100, eR7 150, ATC3-*, AGA ERA

## Components that usually cause this code

- [AGA oven element (eR7, 2.5 kW rectangular)](https://aga.repair/aga-oven-element-replacement) (heating)
- [AGA boiling / simmer plate element](https://aga.repair/aga-hotplate-element-replacement) (heating)
- [AGA main TEK / Tekelek PCB (complete tray)](https://aga.repair/aga-tek-pcb-replacement) (control)

## How it is fixed

Check the element connections at the element terminals for the channel showing the error. Check element resistance (18–20 ohms). If the element is open circuit, replace the element. If element resistance is correct and the software version is correct, replace the main PCB.

> ⚠️ **Safety & DIY disclaimer:** guides on this site are for information only. Appliance repair involves 240V electricity, gas connections, refrigerant and heavy cast-iron parts — anything you do yourself is at your own risk and can damage the appliance or cause injury. The safe option is to book a qualified technician.

## Problems linked to this code

- [AGA oven or hotplate element failed (no heat / reduced heat)](https://aga.repair/aga-element-open)
- [One cooking zone on an electric AGA is dead or the zone lights flash rapidly](https://aga.repair/aga-tek-zone-dead)
- [AGA main PCB (TEK/Tekelek) failure](https://aga.repair/aga-pcb-triac)

## More codes on this platform

- [002 — Com WD Fault (communication watchdog)](https://aga.repair/aga-error-code-002)
- [003 — Com WD Fault (communication watchdog)](https://aga.repair/aga-error-code-003)
- [004 — Not used](https://aga.repair/aga-error-code-004)
- [005 — Not used](https://aga.repair/aga-error-code-005)
- [006 — WD WDT Fault (watchdog timer)](https://aga.repair/aga-error-code-006)
- [007 — TC Ref Fault — the user panel PCB is unable to process thermocouple measurements](https://aga.repair/aga-error-code-007)
- [010-014 — Full power time out — the cooking zone is taking too long to reach its expected temperature. This is a safety feature, not necessarily a component failure.](https://aga.repair/aga-error-code-010-014)
- [020-024 — Thermocouple differential — the two thermocouples in a zone disagree](https://aga.repair/aga-error-code-020-024)
- [060-100 — Thermocouple open circuit](https://aga.repair/aga-error-code-060-100)
- [110-116 — Relay short circuit](https://aga.repair/aga-error-code-110-116)
- [120-124 — Cooking zone overheat error](https://aga.repair/aga-error-code-120-124)
- [139 — User panel overheat — excessive temperatures recorded at the control panel](https://aga.repair/aga-error-code-139)
- [140 — Configuration key fault](https://aga.repair/aga-error-code-140)
- [150-156 — Relay open circuit](https://aga.repair/aga-error-code-150-156)
- [159 — RF fault — receiver not communicating with the PCB](https://aga.repair/aga-error-code-159)

## Frequently asked questions

### What does AGA error code 130-136 mean?

Triac fault

### Can I keep using my AGA with code 130-136?

A power cycle at the breaker (60 seconds) may clear a one-off code. If the code returns, stop using the affected zone or appliance and book service — continuing to run can turn a small fault into a board-level repair.

---

## Book a repair

- Call or text: 206-427-7323 (Mon–Sun 8:00AM–8:00PM, Pacific Time)
- Book online: https://aga.repair/contact/
- Email: service@aga.repair
- Service at your home across the Seattle–Tacoma metro, WA. Diagnostic fee applies toward your repair.

Independent service company — not affiliated with or authorized by AGA / AGA Rangemaster (Middleby). We repair out-of-warranty AGA appliances.